BONspeed sprockets made of steel

Sprocket BONspeed with finished bore H7 and groove according to DIN, induction-hardened

BONspeed® sprockets made of C45 material are produced ready for installation with an H7 fixed hole, induction-hardened teeth, a DIN groove and 2 threaded holes on the sprocket hub. They are the best-value alternative to subsequently further machined standard sprockets, especially when time is of the essence and only a small quantity is required. BONspeed® is a registered trademark of G&G Antriebstechnik GmbH.

Read more
PDF product catalogue
Sprocket BONspeed - technical drawing
Download CAD files

The CAD data, illustrations and technical drawings offered here by G&G Antriebstechnik GmbH have been created and checked with the greatest possible care. However, no guarantee is given for their completeness, up-to-dateness and usefulness. No liability and/or warranty claims can be derived from the use of the data and illustrations in question.

Some of the illustrations may be based on simplifications, especially if they are not supported by exact dimensions - this must be taken into account for designs or calculations.

We reserve the right to make changes due to the continuous development of our product portfolio and individual products.

Sprockets BONspeed
Custom-made sprocket BONspeed

Do you need a custom-made BONspeed® sprocket?

BONspeed® sprockets either as custom-made products based on drawings or as standard parts pre-machined for immediate installation, including heat and/or surface treatment on request.

Inquire now
Read more

BONspeed® sprockets for roller chains according to DIN ISO / ASA

G&G BONspeed® brand sprockets are completely prefabricated as simplex sprockets with a fixed hole diameter, DIN groove and a set screw above the groove. Each sprocket is induction-hardened.

Due to the large number of different pitches and hole diameters, BONspeed sprockets are sold in around 750 product variants. BONspeed is a private brand of G&G Antriebstechnik GmbH, Gütersloh.

Sprockets from G&G Antriebstechnik GmbH are mainly produced for industrial applications in mechanical and plant engineering. Sprocket drives are used for power transmission. They consist of a roller chain and two or more sprockets, in some cases supplemented by return sprockets, chain tensioners, chain guide rails and/or special chain lubrication systems.

Like any other sprocket, BONspeed® sprocket must match the geometry and dimensions of the teeth of the roller chains being used. This is regulated by the relevant DIN / ASA standards.