Sprockets in all variations

Sprocket made of material C45 - simplex with pre-drilled hole

Sprockets according to DIN 8196 from stock with one-sided hub, pre-drilled in steel C45 or stainless steel V2A. Sprocket drives are used for power transmission and usually consist of a roller chain and two or more sprockets / plate wheels, in some cases supplemented by return sprockets, chain tensioners and/or special chain lubrication systems.

Read more
PDF product catalogue
Download CAD files

The CAD data, illustrations and technical drawings offered here by G&G Antriebstechnik GmbH have been created and checked with the greatest possible care. However, no guarantee is given for their completeness, up-to-dateness and usefulness. No liability and/or warranty claims can be derived from the use of the data and illustrations in question.

Some of the illustrations may be based on simplifications, especially if they are not supported by exact dimensions - this must be taken into account for designs or calculations.

We reserve the right to make changes due to the continuous development of our product portfolio and individual products.

Sprockets simplex
Sprockets duplex
Sprockets triplex
Overview

Sprockets

Sprocket simplex - technical drawing

Sprockets simplex

  • Sprockets simplex - C45
  • Sprockets simplex - C45 hardened
  • Sprockets simplex - 1.4301 / rustproof
Sprocket duplex - technical drawing

Sprockets duplex

  • Sprockets duplex
Sprocket triplex - technical drawing

Sprockets triplex

  • Sprockets triplex
Custom-made sprocket

Do you need a custom-made sprocket?

Sprockets either as custom-made products based on drawings or as standard parts pre-machined for immediate installation, including heat and/or surface treatment on request.

Inquire now
Read more

Further information

Sprockets from G&G Antriebstechnik GmbH are mainly produced for industrial applications in mechanical and plant engineering. They must match the geometry and dimensions of the teeth of the roller chains being used. This is regulated by the relevant DIN / ASA standards.

Sprockets are made of steel as well as cast iron and, depending on the technical requirements and in particular the torque to be transmitted, are used in the form of simplex sprockets, duplex sprockets or triplex sprockets. Steel sprockets can also be supplied in a hardened version for heavy-duty applications and if required by the specific use. Stainless steel sprockets and roller chains are mainly used in the food industry.

Sprockets are generally available in simplex, duplex and triplex designs as well as double sprockets for the simultaneous use of 2 simplex roller chains.

In its product range of sprockets / plate wheels, G&G Antriebstechnik GmbH offers completely prefabricated and hardened products from G&G’s private brand BONspeed with bore, groove and set screw over the groove. All other blanks can be processed in a very wide range of variations, ranging from machining to heat and surface treatment to complete custom-made products based on customer drawings.